Field-Stripping an AK-47 Rifle (and Variants)
By Russ Chastain, About.com Guide
Remove Bolt Carrier Assembly
Removing bolt carrier assembly from AK-47 rifle. It has cleared the cuts in the receiver and is being lifted away from receiver. Now you just slide it back, out of the gas tube.
Slide the bolt carrier assembly to the rear of the receiver. It will then be aligned with slots cut into the receiver, and you will be able to lift the rear of the carrier upward and remove it by sliding it backwards out of the gas tube (the hole below the rear sight).
Prev
- Unload the Gun
- Remove Receiver Cover
- Remove Recoil/Return Spring
- Remove Bolt Carrier Assembly
- Remove Bolt From Carrier
- Remove Gas Tube With Top Hand Guard
- Remove Cleaning Rod
- Remove Safety/Selector Lever (if Desired)
- Remove Lower Handguard/Forend
More AK Stuff
Explore Hunting / Shooting
Must Reads
About.com Special Features
Holiday Central
What to eat, where to go, fun things to do and how to save money on the perfect gifts. More >
Introduction to Pilates
Learning Pilates fundamentals can help you get the most out of your exercise regime. More >
©2009 About.com, a part of The New York Times Company.
All rights reserved.